Tekon Universal Sciences, Inc.

Stone Sealer A is a unique water based penetrating sealer which produces an invisible resistant barrier against oil and water stains. Its is a safe, and virtually odorless product and does not contain any toxic or dangerous solvents. 

For protection of all natural stone such as marble , limestone, granite, travertine, slate, sandstone and for manufactured stone such as concrete, brick, rock, saltillo, and quarry tile as well as grout joints.  For indoors and/or outdoors on hardscapes.

• Preparation: Stone Surface should be clean, dry, and free of waxes or other surface coatings. New cement grout joints should be allowed to fully dry prior to application
• Application: Apply sealer in an even and generous film onto the stone surface and grout joints using a Tekon^TM micro fiber mop or Tek pad (micro fiber pad).
• On polished stone: Allow to absorb and dry for 1 to 2 hours. Inspect surfaces and if a residue or film is visible, remove with water and Tekon^TM mop or pad. Some polished granites are very porous and require a second application.
• On porous stone: Very porous stone will usually absorb all the sealer with the first application and no residue cleaning is necessary. For best results, a second application should be applied one hour later. If the second application does not soak into the stone within ten minutes, wipe off excess.