Tekon

Tekon A™ Protective Treatment chemically reacts with silica based surfaces, at the molecular level. The treated surface provides protection from corrosion, oxidization, and water staining.

Directions: To be applied only by a Tekon^® certified Applicator. Apply when temperature is between 60F and 90F. DO NOT apply in direct sunlight. Apply an even amount of Tekon A to a Tek Pad and immediately wipe the pad in a straight-line motion over the surface. To ensure complete coverage apply over one area at a time. Allow Tekon A to stand on the surface for 60 seconds until surface is ready to be treated with a top coat of Tekon B™.  Use indoors and outdoors